A
New and Innovative System Designed for Hanging Flat Decorator Mirrors
Hang-It
makes this once time consuming task much easier.
Hang-It™ has been designed to be used with all types of mirrors. It’s
high strength adhesive backing adheres to all mirror paint backings
that meet industry standards. Hang-It™ saves time and labor when
installing decorator mirrors. Simply peel off the protective paper
on the back of the metal hanger, align the saw tooth slot of the
metal hanger with centering lines you have established on the mirror,
and press in place. Hang your new mirror on the wall making sure
the saw tooth slot is positioned where you want the mirror
to be hung.
Andscot
has been selling quality metal products to the glass industry for
over 25 years. For information concerning Hang-It or any of our
other fine products, please call 1-800-832-5800.
Warranty
This product is warranted to the original purchaser to meet published
specifications, if any, in the absence of published specifications,
to be MERCHANTABLE QUALITY Such warranty may not be assigned or
otherwise transferred by purchaser. NO OTHER WARRANTY, EXPRESSED
OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR ANY OTHER THING MADE Purchaser’s exclusive remedy for breach
of this warranty shall be refund of the price paid for the products
by the purchaser. Except as stated above, Andscot Company, Inc.
shall not be liable for any defect in, or breach of obligation relating
to the defects inthis product, regardless of the theory that may
be asserted, including, without limitation, negligence, contract,
absolute liability in tort or misrepresentation. If the pur chaser
does not accept goods on these terms, they are to be returned at
once, unopened.
Installation
Instructions
- Clean
any contaminates from the back of the mirror using a mixture of
alcohol and water or denatured alcohol.
- Locate
the center of the mirror and draw a vertical line from the top
to the bottom.
- Measure
down 3" to 6" from the top of the mirror and make a
mark on the centering line. This marks the location for the top
of the hanger.
- Locate
the center of the hanger. Mark with a line. (The saw tooth slot
is centered at the top of the hanger.)
- Peel
the adhesive protective paper from the back of the hanger. Align
the centering marks on the mirror and hanger. Press in place making
sure the Hang-It bracket is making full contact with the back
of the mirror. Make mark 3" to 6" from top of mirror
Precautions
- Make
sure mirror and Hang-It are applied at or above 60° room temperature
when assembled.
- After
installing Hang-It on the mirror, wait at least 2 hours before
hanging the mirror. The adhesive gains strength in time and fully
cures in 7 days.
- Hang-It™ will support decorator mirrors weighing up to 40 lbs.
- Always
use gloves when handling mirrors to protect yourself and avoid
damaging the mirror.
|
